The Department of Electrical Engineering was founded in 2005 under the College of Engineering and emerging technologies (CEET) that offers the B.Sc. (Engg) degree in Electrical Engineering to meet the increasing demand for highly educated engineering graduates. |
||||||||||||
Publications/ Research / BooksLast Three Year Articles Year: 2015 1- Prof. Dr. Rafiq Ahmad, Anaum Nawaz, K.M. Deen, A. Farooq, R. Ahmad,; Predicting the corrosion tendency of α brass in acidic and alkaline tap water, International Journal of materials research, 1, 2015 2- prof. Dr. Rafiq Ahmad, N. Azal, Km. Deen, R. Ahmad, Z. Niazi, A Farooq, Mohsin Rafique, Yong=-soo Kim, Khaleeq-ur-Rehman,; Improvement in the pitting resistanc eof inconel-600 by nitrogen ions implantation, Protection of metals and physical chemistry of surfaces, 51(03), 2015 3- Prof. Dr. Rafiq Ahmad, K.M. Deen, A Farooq, M.A. Raza, R. Ahmad, W. Haider,; Estimating the degradation of methylethionium chloride dye on nanotubular TiO2 structure, Journal of industrial and engineering chemistry, 22, 2015 4- Prof. Dr. Rafiq Ahmad, Tahir Ahmad, Rafiq Ahmad, Muhammad Kamran, Bambang A Wahjiodi,; Effect of Thal silica sand nanoparticles and glass fiber reinforcements on epoxy based hybrid composite, Iranian polymer journal, 24, 2015 5- Prof. Dr. Rafiq Ahmad, Raza MA, Westwood A, Stirling C, Ahmad R,; Boron nitrie/ vapour grown carbon nanofibre/ rubbery epoxy based hybrid compsoties for thermal interface applications, , , 2015 6- Prof. Dr. Rafiq Ahmad, F. Riaz, T. Ahmad, M. Kamran M. T. Munir, F. Hussain, M.U. Manzoor, R. Ahmad,; The production and characterization of ultrafine grained metal sheets produced by accumulative roll bonding process, Journal of Pakistan Institute of chemical engineers, 43(02), 2015 7- Dr. Muhammad Kamran, W. Ahmad, G.H. Awan, T. Ahmad, M.T.Z. Butt, L.A. Kasur, M. Kamran,; Phase based study of soldified structures evolved during the TIG welding of 2219-T87 Aluminum Alloy, Journal of Pakistan Institute of chemical engineers, 43(02), 2015 8- Dr. Mohsin Ali Raza, Raza MA, Westwood A, Stirling C.,; Comparision of carbon nanofiller based polmer composite adhesives and pastes for thermal interface applications, Materials & Design, 85, 2015 9- Dr. Aqil Inam, M.R. Zafar, M.A. Mehmood, A. Inam, M.M. A Bhutta, M. Ishtiaq,; Effect of starting microstructure on material removal rate (MRR) of AISI 1045 steel in (Die-sinking) electric discharge machining, Journal of Pakistan Institute of chemical engineers, 43(02), 2015 10- Dr. Aqil Inam, A Inam, R Brydson, DV Edmonds,; Effect of starting microstructure upon the nucleation sites and distribution of graphite particles during a graphitising anneal of an experimental medium carbon machining steel, Materials Characterization, 106, 2015 11- Dr. Tahir Ahmad, Rafiq Ahmad, Muhammad Kamran, Bambang A Wahjiodi,; Effect os magnesium concentration and temperature on the morphology and chemical composition of anodized layer of Al alloys, Journal of Pakistan Institute of chemical engineers, 43(01), 2015 12- T.Z. Butt, M.S. Qayyum, T.A. Tabish, M. Ali, M. Kamran,; Casting simulation of extruded ceramic filters: A perspective study, J. Of the Pakistan Institute of Chemical Engineers, 43, 2015 13- M.T.Z. Butt, W. Ahmad, G.H. Awan, T. Ahmad, L.A. Kasuri, M. Kamran,; Phase based study of solidified structuers evolved during the TIG welding of 2219-T87 Aluminum alloy, J. Of the Pakistan Institute of Chemical Engineers, 43, 2015 14- T.Z. Butt, T.A. Tabish, U. Fatima,; A study of passivation behaviors of surgical austentic and martensitic stainless steel alloys (316 series and 410 series) in citric acid and nitric acid, Annals of faculty Engineering Hunedoara. International Journal of Engineering, Tome XIII , 13, 2015 15- Muhammad Taqi Zahid Butt, Nafisa Gull, Shahzad Maqsood Khan, Muhammad Azeem, Munawar, Muhammad Shafiq, Farheen Anjum, Tahir Jamil,; Synthesis & characterization of zinc oxide (Zno) filled glass fiber reinforced polyester composites, Materials and Design; Elsevier (Science Direct); , , 2015 16- M.T.Z Butt, Tahir Ahmad, M. Kamran,; To Study the effect of Kevlar Fiber-Silica Sand Nanoparticles Reinforcement on Aluminium based Hybrid Composites, , , 2015 17- T.Z. Butt, M. Kamran, Tahir Ahmad, R. Ahmad,; Develop and Characterize Copper-Carbon Fiber Metal Matrix, , , 2015 18- Muhammad Taqi Zahid Butt, Tahir Ahmad, Muhammad Kamran, Bambang Ari Wahjoedi, Muhammad Umar Manzoor, Zaheer Abbas,; The Beneficiation of thal silica Sand and the Production of High grade silicon, Journal of Faculty of Engineering & Tenchology (JFET), 22, 2015 19- M.T.Z Butt, F. Riaz, T. Ahmad, M. Kamran, F. Hussain,; Investigation on various formulations of Rust Converter by using spectroscopic, Microscopic and Electrochemical Characterization Techniques, Journal of Faculty of Engineering & Tenchology (JFET), 43, 2015 20- T.Z. Butt, Tahir Ahmad, M. Kamran, R. Ahmad,; Study of the Microsoftructure and mechanical Properties of Locally developed Carbon Fiber-Silica Sand Nanoparticles Aluminium based Hybrid Composites, , , 2015 21- Prof. Dr. Rafiq Ahmad, Dr. Muhammad Kamran, Dr. Tahir Ahmad, Mr. Faraz Hussain, Mr. Fahad Riaz,; Studying the effefct of precipitation hardening on 6061 aluminum alloy weldments, , Advanced Materials Research, 1133, 2015 22- Prof. Dr. Rafiq Ahmad, Dr. Muhammad Kamran, Dr. Tahir Ahmad,; Study of the Microstructure and Mechanical Properties of locally developed carbon fiber-silica sand nanoparticles aluminium based Hybrid Composites., Materials Science and Technology (MS&T) 2015, , , 2015 23- Prof. Dr. Rafiq Ahmad, Dr. Mohsin Ali Raza,; Synthesis and Characterization of La0.75Sr0.25Mn1-xMgxO3-δ Perovskite for Alkaline Fuel Cell, Materials Today: Proceedings, , 2015 24- Prof. Dr. Rafiq Ahmad,; Improvement in the Pitting resistance of Inconel-600 by nitrogen ions implantation, ., Protection of Metals and Physical Chemistry of Surfaces, 51, 2015 25- Dr. Muhammad Kamran, Dr. Tahir Ahmad,; Comparative Study of Dissimilar Weldings of AA6061 and AA2024 Aluminum Alloys by FSW and GTAW, Journal of Faculty of Engineering and Technology, 22, 2015 26- Dr. Muhammad Kamran, Dr. Tahir Ahmad,; Electroless deposition of high phosphorus Ni-P, Ni-Al2O3-P, Ni-Cu-P coatings and their corrosion behaviour in 0.5M Na2SO4 solution, Journal of the Pakistan Institute of Chemical Engineers, 43, 2015 27- Dr. Muhammad Kamran, Dr. Tahir Ahmad, Mr. Faraz Hussain, Mr. Fahad Riaz,; Investigation of the optimal Composition of rust converters through different electrochemical and characterization techniques, Journal of the Pakistan Institute of Chemical Engineers, 43, 2015 28- Dr. Muhammad Kamran, Dr. Tahir Ahmad, Dr. Muhammad Umar Manzoor,; The Beneficiation of thal silica sand and the production of high grade silicon., Journal of Faculty of Engineering and Technology, 22, 2015 29- Dr. Aqil Inam,; Graphitisation: A Potential New Route to Free-Machining Steels”,“HSLA Steels 2015 and Microalloying 2015 and OES 2015, Conference held in Zhejiang Hotel, , 2015 30- Dr. Mohsin Ali Raza,; Effect of boron nitride addition on properties of vapour grown carbon nanofiber/rubbery epoxy composites for thermal interface application, Composite Science and Technology, 120, 2015 Year: 2014 1- Prof. Dr. Rafiq Ahmad
Dr. Tahir Ahmad,; Effect of modification using NaF with Bacl2 on microstructure and mechanical properties of A356, Al-Si, alloy, International young engineering convention I Yes, 17-19 April 2014, , 2014 2- Prof.Dr. Rafiq Ahmad
Dr. Mohsin Ali Raza, M. Adna, A.V.K. Westwood, T. Jameel, R.Ahmad, A. Inam. K.M. Deen,; Maleated high oleic sunflower oil treated cellulose fiber based styrne butadience rubber compisites, Polymer Composities , , 2014 3- Prof.Dr. Rafiq Ahmad
W. Haider, K.M. Deen, A. Farooq, M. R. Raza,; Estimating the degradation of methylethionium chloride dye on nanotubular TiO2 structure, Journal of industrial Engineering and Chemistry, , 2014 4- Dr. Mohsin Ali Raza, KM Deen, A Farooq, MA Raza, W Haider,; Effect of electrolyte composition on TiO2 nanotubular structure formation and its electrochemical evaulation , Electrochimica Acta, 117, 2014 5- Dr. Aqil Inam,; Corrasion inhibition of 316L stainless steel in Plain tap water, International journal of chemistry and material science, 2, 2014 6- M.F. Hanif, L.Tn. Tran, M. Juntti, and S. Glisic,,; On linear precoding strategies for secrecy rate maximization in multiuser multiantenna wirless network, IEEE Transactions on signal processing, 62 No. 14, 2014 7- M.F.Hanif, L.N. Tran, A. Tolli and Juntti, ,; Computationally efficient robust beamforming for SINR Balancing in multicell downlink with applications to large antenna Array system, IEEE Transactions on Communications, 62 No. 6, 2014 8- L.N. Tran, M.F. Hanif and M. Juntti,; A Conic quadratic programming approach to physical layer multicasting for large -scale antenna arrays, IEEE Signal processing letters, 21, No. 1, 2014 Year: 2013 1- Prof. Dr. Rafiq Ahmad, R. Ahmad, R. Raza, S. Mumtaz and T. Ahmad,; Effect of diffeent modifiers on Microsturcutre and strength of locally developed A356 Al-Si Alloy, Defect and Diffusion Forum, 344, 2013 2- Prof. Dr. Rafiq Ahmad, R. Ahmad, S. Mumtaz and T. Ahmad,; Studing the effect of different combinations of salt modifier on the mechanical properties and microstructure of A356 Al-Si Alloy, Defect and Diffusion Forum, 344, 2013 3- Prof. Dr. Rafiq Ahmad, M. A. Raza, K. M. Deen, H. F. Awan, R. Ahmad and A. Husnain,; Synthesis and Electrochemical characterisation of La0.75 Sr0.25MgxMn1-xO3-8 Perovskite, Proceedings of International Conference on solid state physics, , 2013 4- Prof. Dr. Rafiq Ahmad, M. A. Raza, A. Westwood, C. Stirling and R. Ahmad,; Comparison of thermal interacial performance of carbon nanofiller based polymer composites, Proceedings of Carbon 2013, , 2013 5- Prof. Dr. Rafiq Ahmad, F. Riaz, R.K. Shahzad, M. kamran, F. Hussain, R. Ahmad and T. Ahmad,; Evaluation of surface preparation techniques for steel substrats prior to coating application, Defect and Diffusion Forum, 344, 2013 6- Prof. Dr. Rariq Ahmad
M. Kamran, F. Hussain, R. Ahmad, T. Ahmad and F. Riaz,; Investigating the pitting resistance of 316 stailness steel in Ringer's solution using the cyclic polarization technique, Defect and Diffusion Forum, 344, 2013 7- Prof. Dr. Rafiq Ahmad, Nauman A. Siddiqui, K.M. Deen, M. Zubair Khan,; Investigating the Failure of Bevel Gears in an Aircraft Engine, Case Studies in Engieering Failure Analysis, 1, 2013 8- Prof.Dr. Rafiq Ahmad, T. Ahmad, O. Mamat and R. Ahmad,; Studying the effects of Adding Silica Sand Nanoparticles on Epoxy Based Composites, Journal of Nanoparticles, 2013, 2013 9- Prof. Dr. Rafiq Ahmad, T. Ahmad, O. Mamat, R. Ahmad and An.N. Malik,; Studying the formation of Fe2SiO4 and Pearlite Phases in Iron-Silica Sand Nanoparticles Composites , Defect and Diffusion Forum, 337-338, 2013 10- Prof. Dr. Taqi Zahid Butt, Tanveer Ahmad Tabish,; Corrosion trends of Ti based shape memory alloys having Biomedical applications: A Perspective study , Journal of Faculty of Engineering & Technology (JFET), 20, 2013 11- Prof. Dr. Taqii Zahid Butt
M. Y. Anwar, M. Zubair, M. Ajmal and M.T. Z. Butt,; A Study on injection moudling of two different pottery bodies, Journal of Faculty of Engineering & Technology (JFET), 20, 2013 12- Prof. Dr. Taqi Zahid Butt
M.Y. Anwar, M. Ajmal, M.T. Z. Butt and M. Zubair,; Injection Moudling and Heat Treatment of Ni-Cr-Si-B Alloy Powder, Journal of Faculty of Engineering & Technology (JFET), 20, 2013 Year: 2012 1- Mr. Kashif Mairaj Deen
M. Farooq, S. Naseem, S. Alam R. Ahmad and A. Imran,; Oxidation Behavor of Yttria Stablizhed Thermal Barrier Coatings on mild steel in artidicla sea water, Procedings of first national science conference, 2012, , 2012 2- Mr. Kashif Mairaj Deen
M. Z. Khalid, F. Hussain, R. Ahmad and M.A. Butt,; Effec tof surfance profile on electrochemical behavior of API X-70 in simulated crude oil environment, Proceedings of first national science conferece 2012, , 2012 3- Mr. Kashif Mairaj Deen
A. Farooq, I.H. Khan,; Electrochemical an dMetallurigical characterization of 316L SS weldments in physicolgical solution , Proceedings of first national science conferece 2012, , 2012 4- Mr. Kashif Mairaj Deen
Nauman A. Siddiqui, M. Zubair Khan, Azhar Munir and M. Aftab Amin,; Failure analysis of wheel Gear Hub assembly of an aircraft, Journal of engineering failure analysis, 22, 2012 5- Dr. Krmran Abid
Fiaz Rahman,; Gate-Bias-Induced Tuneable spectral response of silicon photodiode with enhanced UV sensitivity, Proceedings of UK Semiconductors, 2012, , 2012 6- Dr. Kamran Abid
M. S. Farooq, A. Abid, M. Azhar Naeem,; A Qualitative framework for introducing programming Language at High School, Journal of Quality and Technology Management, , 2012 7- Dr. Kamran Abid
Xingsheng Wang, Ali Z.. Khokhar, Scott Watson, Sulaiman Al-Hasani, and Faiz Rahman,; Electrically Tuneable Spectral Responsivity in Gated Silicon Photodiodes, Applied Physics Letters, 99, 2012 8- Dr. Muhammad Kamran
M.A. Fahad, K.M. Deen, and I.H. Khan,; Effect of heat treatment cycles on electrochemical behavior of aluminum 2219, Proceedings of First National Sience Conference, 2012, , 2012 9- Prof. Dr. Tahir Jamil
Misbah Sultan, Khalid Mahmood Zia, Haq Nawaz Bhatti, Rizwan Hussain and Mohammad Zuber,; Modification of cellulosic fabric with polyurethance acrylate copolymers, Part-I: Physicochemical properties, Carbohydrate Polymers, 87, 2012 10- Prof. Dr. Tahir Jamil
Khalid Mahmood Zia, Mohammad Zuber, Ali Rizwan, Shahzia Tabasum and Muhammad Shahid,; Modification of cellulosic fabric using polyvinyl alocohol, Part-I: Colorfastness properties, Carbohydrate Polymers, 87, 2012 11- Prof. Dr. Tahir Jamil
Mohammad Zuber, Khalid Mahmood Zia, Ijaz Ahmad Bhatti, Fazal-ur-Rehman and Ali Rizwan,; Modification of cellulosic fabric using polyvinyl alocohol, Part-II: Colorfastness properties, Carbohydrate Polymers, 87, 2012 12- Prof. Dr. Tahir Jamil
Aisha Batool, Farah Kanwal, Muhammad Imran, and Saadat Anwar Siddiqi,; Synthesis of polypyrrole/zinc oxide composites and study of their structural, thermal and electrical properties, Synthetic Metals, 1.829, 2012 13- Prof. Dr. Taqi Zahid Butt
Muhammad Zafar, Mudassir Ali, Shahzad Masood Khan, Tahir Jamil ,; Effect of dditives on the properties and performance cellulose acetate derivates membrances in the separation of isopropanol/water mixtures, Desalination, 285, 2012 14- Prof. Dr. Rafiq Ahmad
G. Abbas, F. Hussain, K.M. Deen ,; Investingating the effect of Welding on Electrochemical behavoir of SA516 (Grade 70), Proceedings of International Conferenc eon Engineering Science (ICES 2012), , 2012 15- Prof. Dr. Rafiq Ahmad
M.Z. Khalid, K.M. Deen, F. Hussain, and M.A. Butt,; Electrochemical comparison of API X-70 steel surfaced in base oil, Proceedings of International Conferenc eon Engineering Science (ICES 2012), , 2012 16- Prof. Dr. Rafiq Ahmad
K.M. Deen, I.H. Khan and A. Virk,; Engineering Failure analysis in Chemical Provess Industries, Proceedings of International Conferenc eon Engineering Science (ICES 2012), , 2012 17- Prof.Dr. Rafiq Ahmad
M. Farooq, K.M. Deen, S. Naseem, S.Alam, and A. Imran,; Oxidation Behavior of Yttria Stablized Thermal Barrier Coatings on Mild Steel in Artificial Sea Water , Procedings of first national science conference, 2012, , 2012 18- Prof. Dr. Rafiq Ahmad
M. Z. Khalid, K.M. Deen, F. Hussain and M.A Butt,; Effect of Surface Profile on Electrochemical behavior of API X. 70 in Simulated Crude oil environment, Procedings of first national science conference, 2012, , 2012 Year: 2010 1- Murad Habib,; ANP Applied to Electronics Engineering Project Selection, Proceedings of 4th Symposium on Engineering Sciences, , 2010 2- Yaseer A. Durrani,; Low Power Dram Cell, Proceedings of 4th Symposium on Engineering Sciences, , 2010 3- Yaseer A. Durrani,; Efficient Power Optimization Technique for Array Multipliers, Proceedings of 4th Symposium on Engineering Sciences, , 2010 4- Rafiq Ahmad,; A Comparative study of GTAW and SMAW Weldments of AISI 1030 Carbon Steel, Proceedings of 4th Symposium on Engineering Sciences, , 2010 5- Muhammad Kamran,; Effect of SIC Particulate Addition on the Corrosion Behavior of commercially pure aluminum in tape water, Proceedings of 4th Symposium on Engineering Sciences, , 2010 6- Bilal Saleem,; Characterization of HOT DIP Aluminized coating on mild steel, Proceedings of 4th Symposium on Engineering Sciences, , 2010 7- Rafiq Ahmad,; Effect of alloying additions in al on growth and morphology of intermetallic layer in hot-dip aluminized steel, Proceedings of 4th Symposium on Engineering Sciences, , 2010 8- Kashif Mairaj Deen
I.H. Khan, Rafiq Ahmad,; Corrosion of Alpha Brass in Plain Water in Sodium benzoate containing inhibitor, Proceedings of 4th Symposium on Engineering Sciences, , 2010 9- Salman Aziz
Muhammad Kamran,; Development of Kevlar FIBER Reinforced Nylon and fiber glass sheets, Proceedings of 4th Symposium on Engineering Sciences, , 2010 10- Kashif Mairaj Deen
Rafiq Ahmad,; Characterization of intentinal sensitization in TIG-Welded AISI 316L Alustenitic Stainless Steel, Proceedings of 4th Symposium on Engineering Scineces, , 2010 11- Kashif Mairaj Deen
I.H.Khan Rafiq Ahmad,; Study of Medical Grade 316J Stainless steel weldment in different simulated fluid, Proceedings of 4th Symposium on Engineering Sciences, Faculty of Engineering and Technology, University of the Punjab, Lahore, , 2010 12- Kashif Mairaj Deen
Rafiq Ahmad,; Corrosion protection evaluation of mild steel painted surface by electrochemical impedance spectroscopy, Journal of Quality and Technology Management, V(1), 2010 13- Kashif Mairaj Deen,; Failure analysis of water pump shaft, Journal of failure analysis and preventin (ASM), 10, 2010 14- Kashif Mairaj Deen
Rafiq Ahmad,; Microstructural study and electochemical behavior of low alloy steel weldment, Materials and Design, 31, 2010 15- Kashif Mairaj Deen
Rafiq Ahmad,; Failure investigation of heat exchanger plates due to pitting corrosion, Engineering Failure Analysis, 17, 2010 16- Kashif Mairaj Deen,; Failure analysis of heat exchanger fluid vapor phase vent lines in a polyester plant, Engineering Failure Analysis, 17, 2010 17- Kashif Mairaj Deen,; Corrosion failure analysis of spent caustic drainage line pipe, Engineering Failure Analysis, 17, 2010 18- Kashif Mairaj Deen
Rafiq Ahmad,; Microstructural and electrochemical characterization of Ni/Ti2N composite coating for sintered NdFeB permanent Magnets, Key Engineering Materials, 442, 2010 19- Kashif Mairaj Deen,; Impeding corrosion of sintered NDFeB magnets with titanium nitride coating, Materials and corrosion
WERKSTOFFE UNO KORROSION, 60, 2010 20- Kashif Mairaj Deen,; Multilayer ceramic coating for impeding corrosion of sintered NdFeB magnets, Journal of Rare Earths, 27(6), 2010 21- Abdus Salam,; Microstructrual changes associated with high temperature deformation of Ti-3AI-4V alloy at 750c, Proceedings of the Pakistan Academy of Sciences Pakistan, 47, 2010 22- Taqi Zahid Butt,; To study the mechanical properties of unidirectional and Cross Rolled Ni-Cu alloy produced in VIM, Key Engineering Materials, Trans Tech Publications, Switzerland, 442, 2010 23- Taqi Zahid Butt
Muhammad Kamran,; Characterization of locally produced martensitic stainless steel surgical grade AISI 420A, Engineering News, J. of Pakistan Engineering Congress, 43(42), 2010 24- Taqi Zahid Butt,; Characterization of Grade 316 Staineless Steel biomaterial by Electrochemical Analysis, Engineering News, J. of Pakistan Engineering Congress, 43(10), 2010
Seminar/ ConferencesConference Proceedings Year: 2015 1- Conference proceeding on Boron nitrie/ vapour grown carbon nanofibre/ rubbery epoxy based hybrid compsoties for thermal interface applications, , , 2015 2- Conference proceeding on To Study the effect of Kevlar Fiber-Silica Sand Nanoparticles Reinforcement on Aluminium based Hybrid Composites, , , 2015 3- Conference proceeding on Develop and Characterize Copper-Carbon Fiber Metal Matrix, , , 2015 4- Conference proceeding on Study of the Microsoftructure and mechanical Properties of Locally developed Carbon Fiber-Silica Sand Nanoparticles Aluminium based Hybrid Composites, , , 2015 5- Conference proceeding on Study of the Microstructure and Mechanical Properties of locally developed carbon fiber-silica sand nanoparticles aluminium based Hybrid Composites., Materials Science and Technology (MS&T) 2015, , , 2015 6- Conference proceeding on Graphitisation: A Potential New Route to Free-Machining Steels”,“HSLA Steels 2015 and Microalloying 2015 and OES 2015, Conference held in Zhejiang Hotel, , 2015 Year: 2014 1- Conference proceeding on Effect of modification using NaF with Bacl2 on microstructure and mechanical properties of A356, Al-Si, alloy, International young engineering convention I Yes, 17-19 April 2014, , 2014 Year: 2013 1- Conference proceeding on Synthesis and Electrochemical characterisation of La0.75 Sr0.25MgxMn1-xO3-8 Perovskite, Proceedings of International Conference on solid state physics, , 2013 2- Conference proceeding on Comparison of thermal interacial performance of carbon nanofiller based polymer composites, Proceedings of Carbon 2013, , 2013 Will be updated soon Facilities1. Library Faculty
Chemical and Materials Engineering |
||||||||||||
|
||||||||||||