Graduate
About Us
Vision, Mission, PEOs, and PLOs
Vision and Mission |
|
| Vision | |
| To be a world class engineering institute recognized for excellence in education, innovation and entrepreneurship leading to socio-economic development of society. | |
| Mission | |
| The Institute of Chemical Engineering and Technology strives to: | |
• |
Provide a high-quality learning experience to produce Chemical Engineers to meet the human resource needs of the country. |
• |
Provide technical skills in design, synthesis, optimization and operations that will equip graduates in assuming leadership positions in education, research and services. |
Initially a two year course, leading to the B.Sc. degree in Technical Chemistry by the Punjab University was started in 1917 at the F.C. College Lahore which was replaced by a three-year B.Sc. (Hon.) in 1925. In 1946, it was shifted to the Old Campus, Punjab University and raised to the status of an Institute in 1948. Initially two year course, leading to the B.Sc. degree in Technical Chemistry by the Punjab University was started in 1917 at the F.C. College Lahore which was replaced by a three-year B.Sc. (Hon.) in 1925. In 1946, it was shifted to the Old Campus, Punjab University and raised to the status of an Institute in 1948.
| 100 Years of Excellence (Use Adobe Acrobat Reader to Open) |
| Program educational objectives (PEOs) (Use Adobe Acrobat Reader to Open) |
| Contact Us and Social Network Links |
Programs
Presently the Institute of Chemical Engineering & Technology offer a wide range of degree programs.
Graduate
B.Sc. (Engg) Chemical Engineering with Specialization in Petroleum & Gas (Old/Before 2024)
Read more
Graduate
B.Sc. (Engg) Chemical Engineering with Specialization in Petroleum & Gas (New/2024 onwards)
Read moreOur Staff
- All Staff
- Teaching
- Administrative
Prof. Dr. Syed Nadir Hussain
Director
Prof. Dr. Niaz Ahmad Akhtar
Professor Emeritus
Prof. Dr. Aamir Ijaz
Professor Emeritus
Prof. Dr. Arif Butt
Professor Emeritus
Prof. Dr. Abdullah Khan Durrani
Professor
Prof. Dr. Rafi Ullah Khan
Professor
Prof. Dr. Muhammad Rashid Usman
Professor
Prof. Dr. Hafiz Muhammad Anwaar Asghar
Professor
Prof. Dr. Amir Shafeeq
Professor
Prof. Dr. Majid Majeed Akbar
Professor
Prof. Dr. Javeed Ashraf Awan
Professor
Dr. Ayyaz Muhammad
Associate Professor
Dr. Khurram Shahzad
Associate Professor
Dr. Javaid Akhtar
Associate Professor
Dr. Yousuf Jamal
Associate Professor
Dr. Rabya Aslam
Associate Professor
Dr. Mudassar Azam
Assistant Professor
Dr. Toor-e-Aiman Rizvi
Assistant Professor
Dr. Asim Hassan Rizvi
Assistant Professor
Dr. Bilal Haider
Assistant Professor
Dr. Mujtaba Ikram
Assistant Professor
Dr. Saadia Mumtaz
Assistant Professor
Dr. Muhammad Usman Rashid
Assistant Professor
Dr. Syed Zohaib Javaid Zaidi
Assistant Professor
Dr. Madiha Rashid
Assistant Professor (IPFP)
Engr. Ali Nadeem
Lecturer
Mr. Muhammad Suleman Bajwa
Senior Librarian
Mr. Umer Nisar
Network Administrator
Engr. Abid Mahmood
Lab Engineer
Engr. Nazish Aslam
Lab Engineer
Hafiz Muhammad Kamran
Assistant Examinations
Institute of Chemical Engineering & Technology
Chemical and Materials Engineering
Initially a two year course, leading to the B.Sc. degree in Technical Chemistry by the Punjab University was started in 1917 at the F.C. College Lahore which was replaced by a three-year B.Sc. (Hon.) in 1925. In 1946, it was shifted to the Old Campus, Punjab University and raised to the status of an Institute in 1948. ....
Last Three Year Articles
Year:
2021
1-
2-
3-
4-
5-
6-
7-
8-
9-
10-
11-
12-
13-
14-
15-
16-
17-
18-
19-
20-
21-
22-
23-
24-
25-
26-
27-
28-
29-
30-
31-
32-
33-
34-
35-
36-
37-
38-
39-
40-
41-
42-
43-
44-
45-
46-
47-
48-
49-
50-
51-
52-
53-
54-
55-
56-
57-
58-
Year:
2020
1-
2-
3-
4-
5-
6-
7-
8-
9-
10-
11-
12-
13-
14-
15-
16-
17-
18-
19-
20-
21-
22-
Year:
2019
1-
2-
3-
Year:
2018
1-
2-
3-
4-
5-
Year:
2017
1-
2-
3-
4-
5-
6-
7-
8-
9-
10-
11-
12-
13-
14-
Year:
2016
1-
2-
3-
4-
Amir Shafeeq, Aziz ur Rehman,; Effectiveness of different electrodes on the removal efficiency of O-Chlorophenol from industrial waste water, 9th International Conference on Environmental Catalysis, Newcastle, Australia, , 2016
5-
6-
7-
8-
9-
10-
11-
12-
13-
14-
15-
Year:
2015
1-
Prof. Dr. Mahmood Saleem,; Emissions of NOX, SO2, and CO from Co-Combustion of Wheat Straw and Coal Under Fast Fluidized Bed Condition, Combution Science & Technology, 187, 2015
2-
Prof. Dr. Mahmood Saleem,; Study on Hydrogynamics of Indigenous Biomass-Sand Mixture in a Cold Fluidization Column, , , 2015
3-
Prof. Dr. Mahmood Saleem,; Pyrolysis of Biomass: An Experimental Study of the Effect of Feed Particle Size on Yield of Bio-Oil., , , 2015
4-
Aneela Sabir, Atif Islam, Amir Shafeeq, Muhammad Taqi Zahid Butt,; Novel Polymer Matrix composite membrane doped with fumed silica particles for reverse osmosis desalination, Desalination 368 (2015), , 2015
5-
Raziya Nadeem, Amir Shafeeq, Shaukat Ali Shahid,; Effect of Cold-Pressing and Soxhlet Extraction on the Physico-Chemical Attributes of Sunflower (Helianthus annuus L.) Seed Oil, International Journal of Chemical and Biochemical Sciences IJCBS, 7(2015), , 2015
6-
Aneela Sabir, Tahir Jamil, M. Taqi Zahid, Amir Shafeeq,; Influence of Polyethylene Glycol 600 on Cellulose Acetate Membranes for Reverse Osmosis Desalination, Polymers Research Journal, Issue 2, (2015), 9, 2015
7-
S. N. Hussain, H.M.A. Ashgar, H. Sattar, N.W. Brown & E. P. L. Roberts,; Chlorinated breakdown products formed during oxidation of adsorbed phenol by electrochmeical regeneration of a graphite intercalation compound., Journal of Industrial and Engineering Chemistry, , 2015
8-
S. N. Hussain, H.M.A. Ashgar, H. Sattar, N.W. Brown & E. P. L. Roberts,; Free Chlorine Formation during electrochemical regeneration of a graphite intercalation compund adsorbent used for wastewater treatment., Journal of Applied Electrochemistry, 45, 2015
9-
C. Huescar-Medina, B. MacCoitir, H. Sattar, D. J. Slatter, H.N. Phylaktou, G.E. Andrews, B.M. Gibbs,; Comparison of the explosion characteristics and flame speeds of pulversied coals and biomass in the ISO standard 1 m3 dust explosion equipment., , 151, 2015
10-
C. Huescar-Medina, B. MacCoitir, H. Sattar, D. J. Slatter, H.N. Phylaktou, G.E. Andrews, B.M. Gibbs,; Explosion reactivity characterization of Pulversied torrefied spruce wood., Journal of Loss Prevention in the Process Industries, , 2015
11-
H.M.A. Asghar, S.N. Hussain, H. Sattar, N.W. Brown & E.P.L. Roberts,; Mercaptan's removal from aqueous solution using modified graphite based adsorbent through batch-wise adsorption-regeneration., Journal of Chemical Engineering Communications, , 2015
12-
H.M.A. Asghar, S.N. Hussain, H. Sattar, N.W. Brown & E.P.L. Roberts,; Potential Graphite materials fo the synthesis of GICs., Journal of Chemical Engineering Communications, , 2015
13-
H.M.A. Ashgar, T. Ahmad, S.N. Hussain & H. Sattar,; Electrochemical oxidation of methylene blue in aqueous solution., International Journal of Chemical Engineering and Applications, , 2015
14-
S.N. Hussain, H.M.A. Asghar, H. Sattar & E.P.L. Roberts,; Electrochemical regeneration of GIC absorbent in a continnuous electrochemical reactor, International Journal of Chemical Engineering and Applications, , 2015
15-
Amir Shafeeq, Mujtaba Ashraf, Ayyaz Muhammad and Shaukat Ali Shahid,; Application of Forth Flotation Technique to Reduce Sulfur from Lakhra Coal Using Forth Flotation, International Conference on Advances in Environment Research, 87, 2015
16-
Mahmood Saleem, N Ali, K Shahzad, A Chughtai,; Bio-Oil Production from Fast Pyrolysis of Cotton Stalk in Fluidized Bed, Arabian Journal for Science and Engineering 40 (11), 3019-3027, 40, 2015
17-
Javed A. Awan, Christophe Coquelet, Ioannis Tsivintzelis, and Georgios Kontogeorgis,; Phase Equilibrium Measurements and modeling of 1-Propanethiol+1 Butanethiol + CH4 in Methane Ternary, Journal of Chemical & Engineering, 303, 2015
18-
Hina Saeed, Zafar Rashid, Aamir Ijaz, Javeed A. Awan,; Removal of Toxic metallic icons Cr (VI),, Cu (II), Ni (II), Co (II) and Cd (II) from waste water effluents of tanneries by using Punica granatum (pomegranate) membrane., Science International, , 2015
19-
Aamir Ijaz,; 2nd International Conference on Environment and Natural Science, An Empirical Study on the Factors Affecting Job Satisfaction: Evidence from Banking Sector of Pakistan, , 2015
Year:
2014
1-
Aamir Ijaz, Javed A. Awan Kashif Nadeem, Hassnain Mahmood, Hasan Raza, Mehwish Batool, Shazia Naz Malik,; The production of biodiesel from used cooking oil; characterization of key fuel properties of ethyl esters and diesel biodiesel blends, Taylor & Francis group, , 2014
2-
Aamir Ijaz, Rafi Ullah Kha, Kanwar Saeem Akhtar, Sadiq Hussain,; Thermochemical studies and fluidized bed comubtion of low grade pakistani coal blends, Life Science Journal, 10(4), 2014
3-
Aamir Ijaz R.K. Malik, R.N. Lodhi, U. Habiba, S. Irfan,; A qualitative study of the critical success factors of ERP system: A case study approach, Fourth international conference on industrial engineering and operations management, Bali, Indonesia 2014, , 2014
4-
M Saleem K Shahzad, M Ghauri, WA Khan, NA Akhtar,; Modeling and analysis of SO 2 emissions under fast fludized bed conditions using one dimensional model, Advances in chemical engineering and science 2014, , 2014
5-
M Saleem, MS Tahir, K Shahzad,; Enhanced combustion of rice husk for pollution abatement and regional potential of silica from rice husk ash (RHA), AlChE 2014, , 2014
6-
M Saleem, K Shahzad, N Ali, A Chughtai,; Effect of operting parameters on the fast pyrolisis of pakistani maize stalk in bubbling fludized bed reactor, AlChE 2014, , 2014
7-
M Saleem, Ms Tahir, RU Khan G, Krammer,; Experimental simulation of stable vs unstable behavior of bag filter under three common regeneration schemes, AlChE 2014, , 2014
8-
M Saleem, N ali, M e Kamil, K Shahzad, A Chughtai,; Thermo gravimetric study of pakistani cotton & Maize stalk using iso conversional technique, Life Science Journal, 11(8), 2014
9-
Rafi Ullah Khan, MST Hafiz Muhamamd Aamir Rana Mujahid,; Removal of anionic dyes by modified cationic starch, Journal of the Pakistan Institute of chemical engineers, 42(2), 2014
10-
M Saleem, N Ali, K Shahzad, A Chughtai, WA Khan,; Fast pyrolsis of Pakistani cotton stalks in fluidized bed reactor: design and preliminary results, Life Science Journal, 11(7), 2014
11-
Awwad, Nadeen, Liu, Xiangyang; W Afzal, Prausntiz; John M,; Viscosities and densities of phosphonium based ionic luquids mixed with dodecane, Zeitschrift fur physikalische chemie, 228, 2014
12-
Liu, Xiangyang; W Afzal, He, Maogang; Prausnitz, John M.,; Solubilities of small hydrocarbons, viscosities of diluted tetraalkylphosphonium bis(2,4,4-trimethylpentyl) phosphinates, AIChE Journal, 60, 2014
13-
Liu, Zhongguo; Padmanabhan, Sasisanker; Cheng, Kun; Xie, Hongxue; Gokhale, Amit A; W Afzal, Na, Hui; Pauly, Markus; Bell, Alex T; Prausnitz, John M.,; Two step delignification of miscanthus to enhance enzymatic hydrolysis: aqueous ammonia followed by sodium hydroxide and oxidants, Energy & Fuels, 28, 2014
14-
Liu, X., Ruiz, E., W Afzal, Ferro, V.R; Palomark Jose; Prausnitz, John M,; High solubilities for methane, ethance, ethylene, and propane in trimethyloctylposphnium bis(2,4,4-trimethylpentyl) phosphinate [p8111][TMPP], Industrial & Engineering chemistry research, 53, 2014
15-
Liu, Xiangyang; W Afzal, Praunitz, John M,; Unusal trend of vicosities and densities for four ionic liquids containng a tetraalkyl phosphonium cation and anion bis (2,4,4-trimethylpentyl) phosphinate, Journal of chemical thermodynamics, 70, 2014
16-
W Afzal, Liu, Xiangyang; Prausnitz, John M,; High solubilities of carbon dioxide in tetraalkyl phosphonium based ionic liquids and the effect of diluents on viscosity and solubility, Journal of chemical and engineeing data, 59, 2014
17-
C.H. Medina, Hamed Sattar, H.N. Phylaktou, Gordon E. Andrews & Gernard M. Gibbs,; Explosion reactivity characterization of pulverised torrefied spruce wood, 10th International Symposium on hazards, Preention, and mitigation of industrial explosions bergen, Norway, 10-14 June 2014, , 2014
18-
D.J.F. Slatter, Hamed Sattar, C.H. Medina, G.E. Andres, H.N. Phylaktou & B.M. Gibbs,; Biomass explosion analysis; accounting for the residue, 10th International Symposium on hazards, Preention, and mitigation of industrial explosions bergen, Norway, 10-14 June 2014, , 2014
19-
H. Sattar, G.E. Andres, H.H. Phylaktou, B.M. Gibbs,; Turbulent flames speeds and laminar burning velocities of dusts using the ISO I m3 dust expolsion method, Chemical Engineering Transactions, 36, 2014
20-
S.N. Hussain, H.Sattar, M.H.A Asghar, N.W Brown & E.P.L. Roberts,; Electrochemical regeneration of various graphitic adsorbents in an air agitated sequential batch reactor, Chemical Engineering & Science, 2(2), 2014
21-
S.N. Hussin, H.M.A. Asghar, H. Sattar, N.W. Brown & E.P. L Robers,; Removal of tartrazine from water by adsorptin with electrochemcial regeneration, Chemical Engineering Communications, , 2014
22-
H.M.A. Asghar, S.N. Hussain, H. Sattar, N.W. Brown & E.P.L Roberts,; Mercaptans removal from aqueous solution using modified graphite based adsorbent through batch wise adsorption regeneration, Chemical Engineering Communications, , 2014
23-
H.M.A. Asghar, S.N. Hussain, H. Sattar, N.W. Brown & E.P. L. Roberts,; Improved phenol adsorption from aqeuous solution using electrically conducting adsorbents, Korean Jouranl of chemical engineering, 31(5), 2014
24-
H.M.A. Asghar, S.N. Hussain, H. Sattar, N.W. Brown & E.P. L. Robers,; Potential graphite materials for the synthesis of GICs, Chemical Engineering Communications, , 2014
25-
H.M.A.Asghar, S.N. Hussain, H. Sattar, N.W. Brown & E.P.L. Roberts,; Electrochemical synthesized GIC based adsorbents for water treatment using adsorbption and electrochemical regeneration, Journal of Industrial & Engineering Chemistry, 20(4), 2014
26-
H. M.A. Asghar, S.N. Hussain, H. Sattar, N.W. Brown & E.P. L Roberts,; Environmentally friend preparation of exfoliated graphite, Journal of Industrial & Engineering Chemistry, 20(4), 2014
27-
S. N. Hussain, N. D. Heras, H.M. A. Asghar, N.W. Brown & E.P. L. Roberts,; Disinfection of water by adsorption combined with electrochemical treatment, Water research, 54, 2014
28-
H.M. Taib, M.M.Akbar, T. Murugesan,; Physical and excess properties of ternary mixtures of 1-buty1-3 methylimidazolium tetrafluoroborate+monoethanolamine+water at temperature from (303.15 to 353.15) K, Journal of molecular liquids, , 2014
29-
M.M. Akbar, T. Murugesa,; Dessities, refractive indices and excess properties for the binary mixtures of 2-hydroxyethanaminium formate [HEF] with monoethanolamine (MEA) at T=293.15 to 313.15 K, Journal of the Pakistan Institute of chemical engineers, , 2014
30-
M.M.Akbar, T.Murugesan,; CO2 solubility in the adueous 1-ethyl-3-methylimidazolium bis(trifluoromethysulfonyl)imide ([emim][Tf2N] and monoethanolamine (MEA) solutions, Journal of the Pakistan Institute of chemical engineers, , 2014
31-
M.M. Akbar, T.Murugesan,; Densities, refractive indices and excess molar volumes for the binary mixtures of 1-propyromitrile - 3-hexylimidazolim bromide [C2 CN Him Br] with monoethanolamine (MEA) at T=293.15 to 313.15 K, Journal of the Pakistan Institute of chemical engineers, , 2014
32-
M.M. Akbar, T.Murugesan,; Carbon dioxide absorption in aqueous diethanolamine (DEA) with 1-ethyl-3-methylimidazolum bis(trifluoromethysulfonyl(imide ([emim][Tf2N]mixtures at pressures from 100 to 1600 pka, Journal of the Pakistan Institute of chemical engineers, , 2014
Year:
2013
1-
2-
3-
H. M.A. Asghar S.N. Hussain H. Sattar, N.W. Brown & E.P.L Roberts,; Potential graphite materials for the snythesis of GICs, Journal of Chemical Engineering Communications, , 2013
4-
5-
6-
7-
Amir Shafeeq, Ayyz Muhammad Noman Hassan Rafice Dickson,; Production of biodiesel from different edible oils, Proceedings of International Conference on Environmental Management an Engineering, Signapore, September 2013., , 2013
8-
Tahir, Muhammad Suleman Danish, Muhammad Ahmad, M. Ajaz Saleem, Mahmood Ahmad, Ayyaz Feroze, and Nadeem,; Characterization of agro-waste as an alternative fuel source, 2013 AIChE Annual Meeting, 3-8 November, San Franciso, USA, , 2013
9-
Tahir, Muhammad Suleman Saleem, Mahmood Gul, Saeed Akthar, Niaz Ahmad Mathias Siebenhofer,; Actinometric determination of UV_Radiation in wet-tube electrostatic precipitator(WESP) and degradation of pollutants from wastewater, 2013 AIChE Annual Meeting, 3-8 November, San Franciso, USA, , 2013
10-
Tahir, Muhamamd Suleman Saleem, Mahmood,; Enhanced yield of Bio-Gas productin with modified themo-reactor configuration and separation of CO2, 2013 AIChE Annual Meeting, 3-8 November, San Franciso, USA, , 2013
11-
Najaf, Ali Mahmood, Saleem Arshad, Chughtai Khurram, Shahzad,; Fast pyrolsys of pakistani cotton stalks in fluidized bed reactor: design and preliminary results, The 5th Internatinal Conference on applied energy, pritoria, South Africa 2013, , 2013
12-
Aamir Ijaz, Rab Nawaz Lodhi, S.M. Irfan,; Critical failure facts of ERP system: Anexploratory case study of an electric supply company in Pakistan, The 10th Asoam Acade,u pf <amage,emt Omtermatoma; Cpmferemce 2013 Penang, Malaysia August 2013, , 2013
13-
14-
15-
16-
17-
18-
Prof. Dr. Rafiq Ahmad, K. M. Deen, Q. Zia, R. /Gulzar, M. Shehzad, R. Ahmad and A. Farooq,; Electrochemical opiimizatin of TiO2 Nanotubular Structure Formation and Investigating its photocatalytic behavior, Proceedings of Materials Science & Technology 2013, , 2013
19-
Prof. Dr. Rafiq Ahmad, T. Ahmad and R. Ahmad,; Production of thal silica sand nanoparticles for metal matrix composites, Proceedings of 1st international conference on applied chemistry, , 2013
20-
21-
22-
23-
24-
25-
26-
27-
Year:
2012
1-
Muhammad Rashid Usman, Waheed Afzal, Niaz Ahmad,; Dispersed Phase Holdup in a Tall and Low Plate Free Area Liquid Pulsed Sieve-Plate Extraction Column, Journal of Separation Science and Technology, , 2012
2-
Muhammad Rashid Usman,; Detailed Reaction Kinetics for the Dehydrogenation of Methylcyclohexane over Pt Catalyst., Ind. Eng. Chem, 51, 2012
3-
Muhammad Rashid Usman,; Options for On-board Use of Hydrogen Based on the Methylcyclohexane-Toluene-Hydrogen-System, Int. J. Green Energy, DOI: 10.1080/15435075.2011.647168, 2012
4-
Muhammad Rashid Usman,; Dehydrogenation of Methylcyclohexane for On-board Hydrogen Use: Catalyst Development and Performance, J. Pakistan Inst. Chem. Engineers, , 2012
5-
Shahid Munir,; Upgradation of Dandot Coal by heavy Media Separation, International Conference on Engineering Sciences, Lahore-Pakistan 2012, , 2012
6-
Bilal Haider, Rabya Aslam, Muhammad Rashid Usman, Waheed Afzal, Rafi Ullah Khan, Mahmood Saleem,; Densities and Volumetric Properties of Various Pure and Mixed Solvents., International Conference on Engineering Sciences, Lahore-Pakistan 2012, , 2012
7-
Arshad Mehmood Ali,; Nano ZnO and Photo-Catalysis, International Conference on Engineering Sciences, Lahore-Pakistan 2012, , 2012
8-
Hafiz Muhammad Anwar Asghar,; Waste Water Treatment by adsorption and Electrochemical Regeneration, International Conference on Engineering Sciences, Lahore-Pakistan 2012, , 2012
9-
Javeed Ashraf Awan,; Thermodynamics of Natural Gas Containing Organic Sulfur Species (OSS): VLE Measurement and Modeling Using the Cubic Plus Association Equitation of State, International Conference on Engineering Sciences, Lahore-Pakistan 2012, , 2012
10-
Rabya Aslam, Muhammad Rashid Usman,; Kinetics of NO oxidation over Cobalt based Catalyst, International Conference on Engineering Sciences, Lahore-Pakistan 2012, , 2012
11-
Mahmood Saleem,; Effect of Operating Parameters on Resistance Parameters of Filter Media and Limestone Dust Cake for Uniformly Loaded Needle Felts in a Pilot Scale Test Facility at Ambient Conditions, Powder Technology, 228, 2012
12-
Mahmood Saleem,; UV-radiation in Wet-tube Electrostatic Precipitator (WESP), International Conference on Engineering Sciences, Lahore-Pakistan 2012, , 2012
13-
Mahmood Saleem, Rafi Ullah Khan,,; Influence of operating parameters on cake formation in pilot scale pulse-jet bag filter, Powder Technology, 224, 2012
14-
Mahmood Saleem,; Experimental measurement of axial gas flow distribution in pulse-jet b, Filtech Exhibitions Germany, 11th World Filtration Congress, Graz, Austria, , 2012
15-
Mahmood Saleem,; On the Stability of Pulse?Jet Regenerated?Bag Filter Operation, Chemical Engineering & Technology, 35, 2012
16-
Mahmood Saleem, Niaz A Akhtar,; Burning of Pakistani (Salt Range) Coal in a Circulating Fluidized Bed and Radial Heat Transfer Investigations, UK-Pakistan Coal Conference 2012, Leeds, UK, , 2012
17-
Hafiz Muhammad Anwar Asghar, Syed Nadir Hussain,; Wastewater treatment by adsorption with electrochemical regeneration using graphite-based adsorbents, Journal of Applied Electrochemistry, DOI 10.1007/s10800-012-0439-8, 2012
18-
Waheed Afzal,; Inert-Gas-Stripping Method for Measuring Solubilities of Sparingly Soluble Gases in Liquids. Solubilities of Some Gases in Protic Ionic Liquid 1-Butyl, 3-Hydrogen-imidazolium Acetate, Industrial & Engineering Chemistry Research, 51, 2012
19-
Waheed Afzal,; Experimental study and phase equilibrium modeling of systems containing acid gas and glycol, Fluid Phase Equilibria, 318, 2012
20-
Waheed Afzal,; Solubilities of some organic solutes in 1-ethyl-3-methylimidazolium acetate. Chromatographic measurements and predictions from COSMO-RS, The Journal of Chemical Thermodynamics, 47, 2012
Year:
2010
1-
Dr. Shahid Munir,; Air and fuel staged co-combustion of coal with biomass in power station boilers, Journal of quality and technology management, VI, Issue II, 2010
2-
Dr. Shahid Munir,; Co-ccombustion of Biomass with coal: current state of knowledge, Proceedings of Pakistani Academy of Sciences, 47 (4), 2010
3-
Dr. Shahid Munir,; Char oxidation study of sugar cane bagasse, cotton stalk and pakistani coal under 1 % and 3 % oxygen concentrations, Biomass and Bioenergy, 34 (3), 2010
4-
Dr. Shahid Munir,; Co-combustion of Agricultural Residues with Coal: Turning Waste into Energy, Energy & Fules, 24(3), 2010
5-
Dr. Shahid Munir,; Sheameal and cotton stalk as poetential fules for co-combustion with coal, Bioresource Technology, 101(19), 2010
6-
Prof. Dr. Rafi ullah Khan,; CFD modelling of acetylene pyrolsys for vacuum carborizing of steel, Industrial and Engineering Chemistry Research, 49(3), 2010
7-
Prof. Dr. Aamir Ijaz,; The role of CU additions in Al on the properties of hot dip alumized steel, Journal of Quality and Techn ology Management, VI(2), 2010
8-
Prof. Dr. Aamir Ijaz,; Optimized values for a sieve plate pulsed column for acetic acid, water and kerosene system, Journal of quality and technology management, VI(1), 2010
9-
Prof. Dr. Arshad Chughtai,; Failure analysis of heat exchanger fluid vapor phase vent lines in a polyester plant, Journal of Engineering Failure Analysis, 17, 2010
Year:
1-
2-
Last Three Year Books
Year:
2013
1-
Saleem, M Usman, M.R. Aslam R,; Title: Chemical Engineering Terminology Publisher: Lulu Publishing, Year: 2013
Year:
2010
1-
Prof. Dr. Abdullah Khan Durrani,; Title: Control of oxides of Nitrogen and Sulfur from a coal fired CFB combuster Publisher: VDM Verlag, Dr. Muller gmbH & Co.KG, Germany, Year: 2010
2-
Prof.Dr. Mahmood Saleem,; Title: Gas Cleaning: An Experimental Study Pulse Jet Bag Filters Publisher: VDM-Verlag Dr. Mueller, Germany , Year: 2010
| PUBLICATIONS: | |
|
Articles:
|
|
|
•
|
Munir, S.; Nimmo, W.; Gibbs, B.M., (2011). The Effect of air staged, co-combustion of pulverised coal and biomass blends on NOx emissions and combustion efficiency. Fuel 90 (2011) 126–135.
|
|
•
|
Munir, S.; Nimmo, W.; Gibbs, B. M., (2010). Sheameal and Cotton Stalk as potential fuels for co-combustion with coal. Bioresource Technology, 101 (19). 7614–7623.
|
|
•
|
Munir, S.; Nimmo, W.; Gibbs, B.M., (2010). Co-combustion of Agricultural Residues with Coal: Turning Waste into Energy. Energy & Fuels, 24 (3), 2146-2153.
|
|
•
|
Daood, S.S.; Munir, S.; Nimmo, W.; Gibbs, B.M., (2010). Char oxidation study of sugar cane bagasse, cotton Stalk and Pakistani Coal under 1% and 3% oxygen concentrations. Biomass and Bioenergy. 34 (3), 263-271.
|
|
•
|
Munir, S.; Daood, S.S; Cunliffe, A.M.; Nimmo,W.; Gibbs, B.M., (2009) Thermal Analysis and Devolatilization Kinetics of Cotton Stalk, sugar cane bagasse, and shea meal under nitrogen and air atmospheres. Bioresource Technology, 100 (3), 1413-1418.
|
|
•
|
Munir, S.; Akhtar, N.A.; Nimmo, W.; Gibbs, B.M., (2009). NOx formation during combustion process and in-furnace control technologies. Journal of Pakistan Institute of Chemical Engineers, 37, 13-21.
|
|
•
|
Munir, S.; Nimmo, W.; Gibbs, B.M., (2009) Air and Fuel staged Co-combustion of Biomass with Coal. In Proceedings of the 10th International conference on Energy for a Clean Environment, 7-9 July Lisbon
|
|
•
|
Munir, S.; Nimmo, W.; Gibbs, B.M., (2010-submitted) Air and Fuel Staged Co-combustion of Sheameal and Cotton Stalk with Coal. International Journal of Energy for a Clean Environment.
|
|
•
|
Munir, S., (2010). A review on Biomass-Coal Co-combustionl: current state of knowledge. Proceedings of Pakistan Academy of Sciences. 47(4), 265-287.
|
|
•
|
Munir, S.; Nimmo, W.; Gibbs, B.M., (2010). Air and Fuel Staged Co-combustion of Coal with Biomass in Power Station Boilers. Journal of Quality and Technology Management. Volume VI, Issue I1, Dec, 2010, pg. 81-111.
|
|
•
|
Munir, S.; Nimmo, W.; Gibbs, B.M., (2010). Biomass as potential Reburn Fuel in Coal-fired Boilers. Journal of Quality and Technology Management. Volume VI, Issue I1, Dec, 2010, pg. 43-79.
|
|
•
|
Munir, S.; Nimmo, W.; Gibbs, B.M., (2010). Potential Slagging and Fouling Problems associated with Biomass-Coal blends in Coal-fired Boilers. Journal of Pakistan Institute of Chemical Engineers.Vol.38, 1-26.
|
|
•
|
Munir,S., Daood,S.S., Rizvi, Z.H., Butt, M.A., (2009). Development of an Inclined Plate Extractor-Separator for Immiscible Liquids. Energies, 2, 957-975.
|
|
•
|
Daood,S.S., Munir,S., Akhtar,N.A., Butt,M.A., (2007). Effect of operating parameters on extraction in sieve plated pulsed column. Proceedings of Pakistan Academy of Sciences, 44(3), 189-195.
|
|
•
|
Mehmood, S. and Ijaz, A. (2008) Experimental Study on flow through concentric porous filter candles, 10 th World Filtration Congress in Germany, 3 :107-111.
|
|
•
|
Daood, S.S., Ijaz A., Butt, M.A. and Ali, M. (2008) Stability comparison of an improved concentric tube bulb manometer with conventional U-shaped manometer, Measurement, UK, 41: 934-939
|
|
•
|
Mehmood, S., Krammer, G. and Ijaz, A. (2008) Effect of Operating Parameters on Stability of Jet Pulsed Bag Filter – An Experimental Study, S. Mehmood, G. Krammer, A. Ijaz, 10 th World filtration Conference in Germany, 2008, 3 :72-76.
|
|
•
|
Ijaz, A., Ali, M. and Daood, S.S. (2008) Environment friendly manometer for Pressure measurement, Journal of Quality Management
|
|
•
|
Buchholz, D. R., Khan, U. F., Graf, S., Bajohr, and Reimer, R (2008) Simulation of pyrolysis and surface reactions of acetylene at low pressure carburizing conditions of steel. Härterei-Technische Mitteilungen (Germany), 2 :75-83
|
|
•
|
Khan R.U., (2008) et al. Pyrolysis of propane for vacuum carburizing: An experimental and modeling study. Journal of Analytical and Applied Pyrolysis , 81 (2):148 -156
|
|
•
|
Buchholz, D. R., Khan, U. F., Graf, S., Bajohr, and Reimert, R (2007) Modelling of the acetylene pyrolysis under the conditions of the low pressure carburization of steel“Härterei-Technische Mitteilungen (Germany), 1 :5-12
|
|
•
|
Khan, R.U., Bajohr, S. F., Graf, R. and Reimert (2007) Modeling of acetylene pyrolysis under steel vacuum carburizing conditions in a tubular flow reactor. Molecules, 12 : 290-296
|
|
•
|
Khan, R. U., Buchholz, D., Graf, F. Bajohr, S. and Reimert, R. (2007) Cfd Modeling of Acetylene Pyrolysis for Low Pressure Carburizing of Steel. In the proceedings of AIChE annual meeting
|
|
•
|
Mahmood, S., Tahir, S. and Krammer, G. (2008) Experimental Study of Filter Cake Formation on Different Filter Media, In the Proceedings of International Conference on Advancements in Process Engineering (ICAPE) Islamabad, Pakistan, 13-14
|
|
•
|
Tahir, M.S., Saleem M., Gruber, C. and Siebenhofer, M. (2008) Impact of the design of discharge electrode on the Current/Voltage characteristics and the rate of migration in Electrostatic precipitation (ESP), In the Proceedings of International Conference on Advancements in Process Engineering (ICAPE) Islamabad Pakistan, 13-14
|
Conference Proceedings
Year:
2015
1-
Conference proceeding on Study on Hydrogynamics of Indigenous Biomass-Sand Mixture in a Cold Fluidization Column, , , 2015
2-
Conference proceeding on Pyrolysis of Biomass: An Experimental Study of the Effect of Feed Particle Size on Yield of Bio-Oil., , , 2015
3-
Conference proceeding on Application of Forth Flotation Technique to Reduce Sulfur from Lakhra Coal Using Forth Flotation, International Conference on Advances in Environment Research, 87, 2015
4-
Conference proceeding on 2nd International Conference on Environment and Natural Science, An Empirical Study on the Factors Affecting Job Satisfaction: Evidence from Banking Sector of Pakistan, , 2015
Year:
2014
1-
Conference proceeding on A qualitative study of the critical success factors of ERP system: A case study approach, Fourth international conference on industrial engineering and operations management, Bali, Indonesia 2014, , 2014
2-
Conference proceeding on Modeling and analysis of SO 2 emissions under fast fludized bed conditions using one dimensional model, Advances in chemical engineering and science 2014, , 2014
3-
Conference proceeding on Enhanced combustion of rice husk for pollution abatement and regional potential of silica from rice husk ash (RHA), AlChE 2014, , 2014
4-
Conference proceeding on Effect of operting parameters on the fast pyrolisis of pakistani maize stalk in bubbling fludized bed reactor, AlChE 2014, , 2014
5-
Conference proceeding on Experimental simulation of stable vs unstable behavior of bag filter under three common regeneration schemes, AlChE 2014, , 2014
6-
Conference proceeding on Explosion reactivity characterization of pulverised torrefied spruce wood, 10th International Symposium on hazards, Preention, and mitigation of industrial explosions bergen, Norway, 10-14 June 2014, , 2014
7-
Conference proceeding on Biomass explosion analysis; accounting for the residue, 10th International Symposium on hazards, Preention, and mitigation of industrial explosions bergen, Norway, 10-14 June 2014, , 2014
Year:
2013
1-
Conference proceeding on Production of biodiesel from different edible oils, Proceedings of International Conference on Environmental Management an Engineering, Signapore, September 2013., , 2013
2-
Conference proceeding on Fast pyrolsys of pakistani cotton stalks in fluidized bed reactor: design and preliminary results, The 5th Internatinal Conference on applied energy, pritoria, South Africa 2013, , 2013
3-
Conference proceeding on Critical failure facts of ERP system: Anexploratory case study of an electric supply company in Pakistan, The 10th Asoam Acade,u pf <amage,emt Omtermatoma; Cpmferemce 2013 Penang, Malaysia August 2013, , 2013
4-
Conference proceeding on In vivo Histomorophometric and Corrosion Analysis of Ti-Ni =Cr Shape Memory Alloys in Rabbits; World Academy of Science, Engineering Technology, World Academy of Science, Engineering and Technology, 79, 2013, 2013
5-
Conference proceeding on Correlation of microstructure and Corrosion behavior of Martensitic stainlless steel surgical grade AISI 420 A Exposed to 980-10350C, World Academy of Science, Engineering and Technology, 79, 2013, 2013
6-
Conference proceeding on Electrochemical opiimizatin of TiO2 Nanotubular Structure Formation and Investigating its photocatalytic behavior, Proceedings of Materials Science & Technology 2013, , 2013
7-
Conference proceeding on Production of thal silica sand nanoparticles for metal matrix composites, Proceedings of 1st international conference on applied chemistry, , 2013
8-
Conference proceeding on Dehydrogenation of Methycyclohexane for On-board Hydrogen Use; Catalyst Development and Performance, PIChE. Published online, , 2013
9-
Conference proceeding on Options for On-Board use of Hydrogen Based on the Methycyclohexane-Toluene-Hydrogen-System, Int. J. Green Energy 10, , 2013
10-
Conference proceeding on Dispersed Phase Holdup in a tall and low plate free area liquid pulsed sieve-plate extraction Column, Sci. Tech. 48, , 2013
Will be updated soon
| Air Conditioned Class Rooms | |
| State of the Art Library | |
| Girls Common Room | |
| Conference Room | |
| Seminar Hall | |
| Prayer Hall | |
| Photocopy Shop | |
| Neat and Clean Canteen | |
| Laboratories | |
| Laboratory Wise List of Equipments present in ICET | |
| 1) Main Chemical Engineering Laboratory | |
| Following laboratories covered in main chemical engineering laboratory. | |
| 1.1) Transport Phenomena Laboratory | |
| 1.2) Separation Processes Laboratory | |
| 1.3) Heat Transfer Laboratory | |
| 1.4) Fluid and Particle Mechanics Laboratory | |
| 1.1) Transport Phenomena Laboratory | |
| a) Stagnant water film | |
| b) Double pipe heat exchanger | |
| c) Thermal conductivity apparatus | |
| d) Film and drop wise condensation | |
| e) Vertical tube free and forced convection | |
| 1.2) Separation Processes Laboratory | |
| a) Air dryer | |
| b) Vacuum dryer | |
| c) Cooling tower | |
| d) Liquid solid fluidization | |
| e) Gas solid fluidization | |
| f) Wetted wall column | |
| g) Packed column apparatus | |
| h) Pulsed sieve plate column | |
| i) Steam distillation | |
| j) Batch distillation column | |
| k) Bubble cap distillation column | |
| l) Rotary drum crystallizer | |
| m) Spray dryer | |
| n) Rotary drum film dryer | |
| o) Freezer dryer with refrigeration | |
| p) Open pan evaporator | |
| q) Salting type evaporator | |
| r) Forced circulation evaporator | |
| s) Climbing and falling film evaporator | |
| 1.3) Heat Transfer Laboratory | |
| a) Heating metallic block | |
| b) Single effect evaporator | |
| c) Heat conduction apparatus | |
| 1.4) Fluid and Particle Mechanics Laboratory | |
| a) Orifice meter | |
| b) Venturi meter | |
| c) Rota meter | |
| d) Pitot tube | |
| e) Fluid flow rig | |
| f) Plate and frame filter press | |
| g) Rotary drum vacuum filter | |
| h) Centrifugal two stage pumps | |
| i) Centrifugal compressor | |
| j) Sedimentation apparatus | |
| k) Cyclone separator | |
| 2) Particulate Solid Technology | |
| a) Jaw crusher | |
| b) Disc Mill | |
| c) Pebble Mill | |
| d) Hammer Mill | |
| e) End Runner Mill | |
| f) Magnetic Separator | |
| g) Kneader mixer for pastes | |
| h) Kneader Mixer for dry solids | |
| i) Sugar Cane crusher | |
| j) Pan Granulator | |
| k) ASTM Sieves | |
| 3) Chemical Process Industries Laboratory | |
| a) Oven | |
| b) Furnace | |
| c) Grinder | |
| d) Sieves | |
| e) pH Meter | |
| f) Coal Crusher | |
| g) Vacuum Pump | |
| h) Weight Balance | |
| i) Air Compressor | |
| j) Particle Size Analyzer | |
| k) Fast Pyrolysis System (Large Scale) | |
| l) Fast Pyrolysis System (Small Scale) | |
| m) Circulating Fluidized Bed Combustor | |
| 4) Fuel and Combustion Laboratory | |
| a) Penetrometer | |
| b) Engler Viscometer | |
| c) Saybolt Viscometer | |
| d) Redwood-I Viscometer | |
| e) Redwood-II Viscometer | |
| f) Bomb Calorimeter | |
| g) Junkers Gas Calorimeter | |
| h) Laboratory Centrifuge | |
| i) Conradson Carbon Residue | |
| j) Flash and Fire Point Tester | |
| k) Cloud and Pour Point Apparatus | |
| l) Aniline Point Test Apparatus | |
| m) ASTM Distillation Apparatus | |
| 5) Chemical Engineering Thermodynamics | |
| a) Thermal Radiation Cube | |
| b) Miniature Steam Power Plant | |
| c) Refrigeration study apparatus | |
| d) Thermal Expansion Apparatus | |
| e) Mechanical Equivalent of Heat | |
| f) Thermal Equilibrium Apparatus | |
| g) Boyle-Marriott’s Law Apparatus | |
| h) Thermal Conductivity Apparatus | |
| i) Freezing Point depression apparatus | |
| 6) Instrumentation and Process Control Laboratory | |
| a) Flow Controller | |
| b) Level Controller | |
| c) Pressure Controller | |
| d) Pressure Transducer | |
| e) Dead Weight Tester | |
| f) Temp Controller on/off | |
| g) RTD Calibration Apparatus | |
| h) Thermocouple Calibration with Hg Thermometer | |
| 7) Catalyst Characterization Laboratory | |
| a) Gas Chromatograph | |
| b) Atomic Absorption Spectrometer | |
| c) Micromeritics Chemisorb | |
| d) Co-current Down flow contactor reactor | |
| e) Absorption column | |
| f) Three phase chemical reactor | |
| g) Drying oven | |
| h) Muffle furnace | |
| i) Tube furnace | |
| j) Hot plate | |
| k) Centrifuge | |
| l) Vacuum Pump | |
| m) Rotary evaporator | |
| n) Weigh balance | |
| o) Air compressor | |
| 8) Post Graduate Research Laboratory | |
| a) Sonocater | |
| b) Rotamantle | |
| c) Homogenizer | |
| d) Hydrogenator | |
| e) Karl fisher titrator | |
| f) Digitilized pH meter | |
| g) Rheometer | |
| h) Gas chromatograph | |
| i) UV spectrophotometer | |
| j) Magnetic separator | |
| k) High performance liquid chromatography | |
| 9) Physical Chemistry Laboratory | |
| a) Polatimeter | |
| b) Calorimeter | |
| c) Stalagmometer | |
| d) Refrectrometer | |
| e) Conductometer | |
| f) Fleme photometer | |
| g) Spectrophotometer | |
| h) Digitalized pH meter | |
| i) Ostwald Viscometer | |
| 10) Applied Chemistry Laboratory | |
| a) Oven | |
| b) Centrifuge | |
| c) Water bath | |
| d) Electric stirrer | |
| e) Weight box | |
| f) Electric weigh balance | |
| g) Muffle Furnace (1100°C) | |
| h) Electric distillate water plant | |
| 11) Applied Physics Laboratory | |
| a) 2-Way Keys | |
| b) Voltameter | |
| c) Power Supply | |
| d) Galvanometer | |
| e) Potentiometer | |
| f) Post Office Box | |
| g) Sextant Apparatus | |
| h) Fly Wheel Apparatus | |
| i) Carey-Foster Bridge | |
| j) Low Resistance Boxes | |
| k) Compound Pendulum | |
| l) High Resistance Boxes | |
| m) R.L.C. Series Apparatus | |
| n) Maxwell Needle Apparatus | |
| o) Viscosity Apparatus (Viscometer) | |
| p) Law of Cooling Apparatus (Thermometer) | |
Email: info.icet@pu.edu.pk
Phone: +92 42 9923 0065
Postal Address: Institute of Chemical Engineering & Technology, University of the Punjab, Quid e Azam Campus, Lahore, Pakistan
Phone: +92 42 9923 0065
Postal Address: Institute of Chemical Engineering & Technology, University of the Punjab, Quid e Azam Campus, Lahore, Pakistan
Chemical and Materials Engineering